Make your Own Reflective Pet Collar

Make Your Own Reflective Pet Collar

Make your Own Reflective Pet Collar

Keep your pet safe by making your own Reflective Pet Collar! Walking in the dark with our fur babies (our pets) or letting them out to roam at night can be risky because they can’t be seen. Keep them safe! Light these fur babies up with a Reflective Pet Collar you can make yourself! Easy step by step instructions with pictures to guide you along while you create your pet’s own Reflective Pet Collar.

Skill level: easy

Glow in the Dark Collar

Material list for the Reflective Pet Collar.

This collar can be very sturdy by using an upholstery thread then sewing the seams multiple times and using a heavy plastic buckle with a welded D ring. Also you can make the collar all cotton by purchasing cotton webbing and thread.

To make the Reflective Pet Collar follow these simple steps.

1. Measure pet’s neck circumference.

First measure around your pet’s neck loosely. Then take this number and multiply it by 1.5. This is the length you will need of the webbing and Reflective Paw Print Iron On. For example, my dog’s neck measured 11 inches, multiplied 1.5, gives me the length 16.5 inches

2. Measure webbing and Reflective Paw Print Iron On.

Lay the webbing flat next to the measuring tape and mark your measurement. Next lay the Reflective Paw print Iron On along side the measuring tape and mark your measurement.

Measure the webbing

3. Cut the webbing and Reflective Iron On.

Use scissors to cut straight across the webbing at the marked measurement. Then do the same with the Reflective Paw Print Iron On.

Reflective Pet Collar buckle

4. Melt the ends of the webbing.

Take a lighter and gently melt the end of the webbing to prevent the end from fraying or unraveling. Light the lighter or candle then gently wave the end of the webbing through the flame. Be careful not to burn the webbing or your fingers!

5. Attach the Reflective Paw Print Iron On.

Set the Iron to the recommended temperature per your Reflective Paw Print Iron On. Lay the webbing flat on an ironing board. Next line up theReflective Iron On at the beginning of one end of the webbing. Center the Reflective Paw Print Iron On, on the webbing. Place iron on the end of webbing with the Iron On placed on top. Next move the iron towards the long end of webbing while you continue to place the Iron On along the center of webbing. Use gentle pressure while ironing. Check to make sure the Iron On is attaching but do not burn your fingers as the Iron On gets hot.

iron on the reflective paw print
reflecting paw print
Peeling off Iron on reflective collar

6. Attach the adjuster part to collar.

Thread the adjuster piece onto the webbing with the grips of the adjuster piece on the Reflective Paw print side.

Reflective collar adjuster attachment
back side of adjuster

Rotate collar so that the webbing side is facing up.

webbing up on reflective collar

Stitch along the edge a half inch in from the raw edge. Use a straight stitch to sew back and forth, 4 or 5 times to secure this in place.

Reflective collar adjuster sewn
reflective adjuster sewn

My sewing machine is a work horse and sews right through this collar, but if your machine struggles, spin your wheel by hand to bring the needle down through the material for the first row to put holes into the collar. Or just run your machine at a slow speed, letting the needle work through the material while not bending the needle with too much pressure.

7. Attach the male piece of the buckle.

With the webbing facing up, thread the male end of the buckle through pulling it to the middle of the collar. Then thread the end through the buckle adjuster piece.

The collar should make a circle. Next pull the loose end of the webbing so the male end and the adjuster piece are a few inches apart.

prepare to weave the adjuster
male reflective collar under adjuster piece
male reflective attached to adjuster

8. Thread the D ring onto collar.

The flat side of the D ring should be on the webbing side, then the curved side of the D ring should be on the Reflective Paw Print side.

D ring on Paw Print
D ring on reflective collar

9. Attach the female side of the buckle.

Thread the female side of the buckle onto the collar with the female side towards the Reflective Paw Print side.

female going on reflective collar

Loop the free end of the collar around to the far end of the D ring. This should cause the webbing to be together. Next thread the loose end under the D ring (or back inside the D ring) and back towards the female buckle. Look closely at these pictures.

circle of female and D ring
D ring and female buckle on reflective collar

Make sure your collar looks like the one in the pictures above and below. Now pinch together and make sure there is enough room for the sewing machine foot to fit between.

reflective pet collar pinched

10. Sew the female end down.

Due to the thickness of all the layers, this is the hardest piece to sew. Place the pinched collar under the sewing machine foot. Then use a zigzag stitch if available because it is a stronger stitch, if not use a straight stitch. Stitch back and forth, 4 times. Again if the needle doesn’t pass through the material easily, go slow or move the needle by hand. Take your time and don’t rush this step. This will secure both the D ring and female buckle into place.

reflective pet collar female sewn down

11. Trim all the loose threads and buckle your collar!

Move the adjuster piece to make the collar larger or smaller to fit your dog!

Enjoy your Reflective Pet Collar!!

Hi, I’m Jules!

My goal is to help others learn new things without getting frustrated. Join me in my DIY craft projects adventures with simple, complete instructions, and read more about me here.

Create Happy!

 Jules Signature light purple

I love to DIY, make things by hand and be creative. My goal is to help others learn new things without getting frustrated. Join me in my DIY adventures with simple, complete instructions, and read More about me here.

Create Happy!

Glow in the Dark Pet Collar.

Glow in the Dark Collar

Glow in the Dark Pet Collar.

Glow up your pet by making your own Glow in the Dark Pet Collar! Walking in the dark with our fur babies (our pets) or letting them out to roam at night can be risky because they can’t be seen. Keep them safe! Light these fur babies up with a Glow in the Dark Pet Collar you can make yourself! Easy step by step instructions with pictures to guide you along while you create your pet’s own Glow in the Dark Pet Collar.

Skill level: easy

Glow in the Dark Collar

Material list for the Glow in the Dark Pet Collar.

  • Nylon Webbing  Webbing

    (cotton can be used as well)

  • Glow in the Dark Iron On Tape Glow in the Dark Tape

  • Buckle and Adjuster

  • Welded D ring D Ring

  • Sewing machine

  • Measuring Tape

  • Iron

  • Scissors

  • Lighter

This collar can be very sturdy by using an upholstery thread then sewing the seams multiple times and using a heavy plastic buckle and D ring. Also you can make the collar all cotton by purchasing cotton webbing and thread.

To make the Glow In the Dark Pet Collar follow these simple steps.

1. Measure pet’s neck circumference.

First measure around your pet’s neck loosely. Then take this number and multiply it by 1.5. This is the length you will need of the webbing and Glow in the Dark Iron on Tape. For example, my dog’s neck measured 11 inches Times 1.5 Gives me the length 16.5 inches

2. Measure webbing and Glow in the Dark Iron on Tape.

Lay the webbing flat next to the measuring tape and mark your measurement. Next lay the glow in the dark tape along side the measuring tape and mark your measurement.

3. Cut the webbing and Glow in the Dark Iron on Tape.

Use scissors to cut straight across the webbing at the marked measurement. Then do the same with the Glow in the Dark Iron on Tape.

4. Melt the ends of the webbing.

Take a lighter and gently melt the end of the webbing to prevent the end from fraying or unraveling. Light the lighter or candle then gently wave the end of the webbing through the flame. Be careful not to burn the webbing or your fingers!

5. Attach the Glow in the Dark Iron on Tape.

Heat Iron to the recommended temperature per your Glow in the Dark Iron on Tape. Lay the webbing flat on an ironing board. Next line up the Glow in the Dark Iron on Tape at the beginning of one end of the webbing. Center the Glow in the Dark Tape on the webbing. Place iron on the end of webbing with the tape placed on top. Next move the iron towards the long end of webbing while you continue to place the tape along the center of webbing. Use gentle pressure while ironing. Check to make sure the tape is attaching but do not burn your fingers as the tape gets hot.

6. Attach the adjuster part to collar.

Thread the adjuster piece onto the webbing with the grips of the adjuster piece on the glow in the dark side.

Rotate collar so that the webbing side is facing up.

Stitch along the edge a half inch in from the raw edge. Use a straight stitch to sew back and forth, 4 or 5 times to secure this in place.

My sewing machine is a work horse and sews right through this collar, but if your machine struggles, spin your wheel by hand to bring the needle down through the material for the first row to put holes into the collar. Or just run your machine at a slow speed, letting the needle work through the material while not bending the needle with too much pressure.

7. Attach the male piece of the buckle.

With the webbing facing up, thread the male end of the buckle through pulling it to the middle of the collar. Then thread the end through the buckle adjuster piece.

The collar should make a circle. Next pull the loose end of the webbing so the male end and the adjuster piece are a few inches apart.

8. Thread the D ring onto collar.

The flat side of the D ring should be on the webbing side and the curved side of the D ring should be on the Glow Tape side.

9. Attach the female side of the buckle.

Thread the female side of the buckle onto the collar with the female side towards the glow tape.

Loop the free end of the collar around to the far end of the D ring. This should cause the webbing to be together. Next thread the loose end under the D ring (or back inside the D ring) and back towards the female buckle. Look closely at these pictures.

Make sure your collar looks like the one in the pictures above and below. Now pinch together and make sure there is enough room for the sewing machine foot to fit between.

10. Sew the female end down.

Due to the thickness of all the layers, this is the hardest piece to sew. Place the pinched collar under the sewing machine foot. Then use a zigzag stitch if available because it is a stronger stitch, if not use a straight stitch. Stitch back and forth, 4 times. Again if the needle doesn’t pass through the material easily, go slow or move the needle by hand. Take your time and don’t rush this step. This will secure both the D ring and female buckle into place.

11. Trim all the loose threads and buckle your collar!

Move the adjuster piece to make the collar larger or smaller to fit your dog!

Enjoy your Glow in the Dark Pet Collar!!

Hi, I’m Jules!

My goal is to help others learn new things without getting frustrated. Join me in my DIY craft projects adventures with simple, complete instructions, and read more about me here.

Create Happy!

 Jules Signature light purple

I love to DIY, make things by hand and be creative. My goal is to help others learn new things without getting frustrated. Join me in my DIY adventures with simple, complete instructions, and read More about me here.

Create Happy!

Real Fur Pillows.

Real Fur Pillows.

Learn how to make your own real fur pillows for your home or as a gift! These instructions teach you how to make fur throw pillows affordably at home. The lush softness and timeless elegance of real rabbit fur pillows are a luxury. Yet quality natural fur decor can be hard to find. When you do find it, the price is shocking! Home Depot priced an 18 x 18 real fur pillow for $239. I know! I didn’t know they even sold fur pillows!

Skill level: difficult ~ not for your first crafting rodeo!

Material list 

  • Fur pelts (4 rabbit pelts for one 18 inch square pillow)
  • Backing material (at least a 20 inch square)
  • Straight pins
  • Leather needle for sewing machine
  • Utility knife with sharp blade
  • Cuting mat
  • Upholstery thread or heavy duty thread
  • Pillow insert or filling 18 inch
  • Sewing machine
  • Leather sewing machine needle
  • Ruler or larger straight edge
  • Thimble (to protect fingers if needed)
  • Tweezers, or something to pick fur out of seam

I used my Elna 6001 sewing machine with a leather needle to sew the real fur pillow. Most sewing machines can sew through a few rabbit pelts, using a leather needle. If you intend to sew a large quantity or a variety of pelts, it would be best done on a leather sewing machine.

Real Fur

Here you can learn how to make a real fur pillow at home, a 18 x 18 inch pillow with real rabbit fur pelts. Fur can be political, but I feel if the animal is eaten then all of the animal should be used, including the fur.

People hunt rabbit to eat and pet food companies use rabbits in pet food. Fur companies obtain these hides then they are tanned and sold. There are many choices for type, color, quality and quantity of pelts to buy.

Finding Fur

My son Alex is moving into a new home and asked me to make to real rabbit fur throw pillows for his living room couch. He found the 8 pelts for this project at www.naturalexotics.com online for around $100. Look for a reputable site and research it before you buy. I can not support buying from a company selling endangered or illegal animal pelts.

Fur pelts are available from different kinds of animals, in many colors and with different levels of quality. Each real fur pillow in this design will use 4 pelts so there isn’t much room for error.

The supplies

Alex and I had the real fur pillow design along with the fur but we needed a few more supplies. At Joann’s fabric, Alex chose a patterned brown leather-like fabric that is soft and supple for the backing.

Genuine soft leather or ultra suede could be used for the backing fabric but Alex liked the price and feel of this fabric. His pillow priorities are the softness and look. Think about your pillow priorities as you choose your materials.

 

1. Fur Pelts

Purchase 4 rabbit fur pelts for the throw pillow and lay them out flat. Each pelt is unique and may have defects, depending on what grade or quality is purchased. Locate any flaws or holes that need to be sewn closed.

 

Here is a picture of the flaws in the pelts I was working with for the real fur pillow. There can be holes or areas of shorter fur. Think of who the pillow is for. Alex likes a natural look to the fur so these variations were not an issue in his pillows. Flaws can be repaired or trimmed out to eliminate them. When buying the pelts, purchase a higher quality grade pelt if the flaws will be an issue in your project.

 

2. Repair

One pelt had a hole that needed repair. I stitched it closed but this can be tricky, usually the hole is small and the needle with thread are larger. The repair will be on the inside of the pillow so as long as the hole is closed, the fur side of the pelt will look fine. The hole was repaired prior to sewing it to the other pelts, but the picture was taken afterwards.

 

3. Design of Pillow

Lay the 4 pelts out in the design pattern you have chosen for your fur throw pillow. Pay attention to the color variations and fur direction of your pelts. Fur grows in the direction from head to tail. When deciding on the pattern realize in higher quality fur products, the fur all runs in the same direction. There are designs where the fur lays in many directions. This is usually when smaller pieces are sewn together to make one big piece.

In this design the fur will all run in the same direction providing a softer feel. Here is a picture showing fur in opposite directions. As the hand runs over this, half will be against the natural grain.

 FYI

The type of rabbit pelt Alex chose, the fur  was lighter on the underside. When the pelts are laid out in the design pattern, the lighter fur will run down the middle, forming a stripe.

Next turn the pelts fur side down, keeping them in the same order as the layout. Check twice to make sure the fur is all going in the same direction because the pelts are expensive and a mistake can be costly.

 

The edges of the pelts will be uneven and have a different thickness. It doesn’t have to be all the same thickness, but the needle has to make it through the pelt. If there is an area that a needle won’t go through, hammer it flatter. Rabbit tends to be a thinner pelt so if it needs to be thinner, put a cloth between the pelt and hammer for protection.

 

4. Trimming fur

With the fur side down, begin to trim the pelts in a specific order to keep them organized. I began by trimming the inside edge of both pair of pelts, the vertical seam running top to bottom. 

Here is the pattern that I trimmed and sewed the pelts. 

Real rabbit fur pillow instructions

The Order

First trim the orange edges of A and B, then C and D, then sew A to B and C to D at the orange edges.

Next trim the yellow edge of the AB piece and the CD piece. Then sew the AB piece to the CD piece. 

The blue arrows represent the direction of the fur.

Use a straight edged ruler and a utility knife to trim the pelts. Do not use scissors because they will shear through hair, creating uneven fur on the finished fur throw pillow.

Find the lowest point on the pelt and use that as the mark to set your straight edge.

 

The cut

The pelt is pliable and moves while cutting and sewing.  Pelts can gather or bunch up and cause a rippled uneven cut. Here is a picture of how I held the pelt and straight edge. Put pressure down on the ruler while lightly and gently pulling the pelt away from ruler. I also started to cut in the middle and worked outwards. Work slow for best results. A nice even straight edge is important for a quality finished product.

The fur can be trimmed off the pelt at the seam so the fur lays smoothly. The designs and creative ideas are endless.

Look at the ruler and utility knife and not my hands, please. I hear my sister saying ” Oh my! Those are mom’s hands” so here is nod to mom!

 

5. Save the fur

As you trim the edges, save the scraps of fur. They can be used in other projects that I will show you. Stay tuned! I save mine in a cardboard box but they can be stored in a paper bag as well. Keep them in a well-ventilated area until you are ready to use them. Place moth balls or essential oils inside if insects or rodents are a problem.

 

Flying fur

Once the trimming begins ~ the fur will fly! Have the vacuum ready and don’t have a fan blowing. I vacuumed the table with the straight edge still on top of the cut edge. Just hold the vacuum above the fur, careful not to suck up the pelt. This helps keep the flying fur under control.

6. Sewing pillow

Pin the pieces for the real fur pillow together in the same order as shown in the diagram. Now begin to sew the trimmed pieces together with the upolstery thread.

There are two ways to do this. First, trim the inside edge then sew together. Second, trim all the pieces then sew together. I trimmed the inside edge then sewed it together. Then I trimmed the next edge and sewed it together. This way I made sure the fur stayed in the same layout that I had planned.

Sew the fur together following the same pattern as in the diagram.

The leather sewing needle should sew through the rabbit pelt with ease. If there is a thicker area, turn your needle down by hand to ensure your needle doesn’t break.

   7. Picking seams

After all the seams are sewn, pick all the fur out of the seams. With twizzers or a chop stick, run the tool under the fur lifting it from the seam. Be carful not to cut the fur or pull it out of the pelt.

 8. Trim the Outer Edge

Now that the 4 pelts are sewn into a square and the seams are hidden under the fur, trim the outer edges of the pelts. Trim the outer edge of the fur square the same way the indivdual pelts were trimmed. Find the lowest point to line up the straight edge and trim in a straight line. Use the same method as stated above. Make sure to use a straight razor or box cutter and not scissors. Using scissors cuts the fur along with the hide forming an unnatural finished edge. edge. Use your hand to gently pull and hold the pelt down as you cut so it doesn’t bunch up.

 

 9. Cut the Backing

Lay the fabric for the backing on the cutting board then trim it to a 20 x 20 inch square using the ruler or straight edge.

 

 10. Pin Together

Lay the fur pelts flat with the fur side facing up with the hide down. Now lay the backing fabric with the right side down, wrong side facing up. The two sides you want to see in the finished pillow should be facing towards the inside. Line up the edges and pin together.

11. Sewing together

After you pinned the fur pelt to the backing fabric, sew it together using the upholstery thread.  Leave a small opening unsewn or open. This hole is where the pillow form will slide into the pillow.

12. Finishing the Pillow

Squeeze the pillow form or stuffing into the pillow through the hole left unsewn. Then pin the opening closed turning the edges of the fabric into the opening. Stitch the opening closed either with the machine or with a very sharp needle by hand. If you use a machine to close the opening, sew very slowly, close to the edge. If you stitch by hand, use a thimble to protect your finger tip as you push the needle through the pelt.

Use the tool again to pull the fur out of the seam all around the pillow. Pull the fur carefully out of the stitching. The fur should fall over the seam. Fluff the pillow form by pushing in on each side of the pillow. Smooth the fur with your hand.

Enjoy your luxurious real fur pillow!

Real Fur Pillow supplies
Real Fur Pillow Pelt
Pelts of Real Fur Pillow
Flaw in Real Fur Pillow pelt
Flaw Repair on Real Fur Pillow
Layout of Real Fur Pelts
Real Fur pillow Opposite pelt
Real Fur Pillow under side
Trimming inside seam of Real Fur Pillow
Trimmed Real Fur Pillow
Trimming Real Fur Pillow
Handmade Jules
lowest point on Real Fur Pillow
Real Fur Pillow trim hand position
Pieces to save of pelt of Real Fur Pillow
Pieces to save of pelt of Real Fur Pillow
vaccum the fur on Real Fur Pillow
Sewing the real fur pillow
Pinning the real fur pillow
Backside of real fur pillow
Using the tools to pick fur out of seam
outside edge trimming of real fur pillow
fabric cut for backing of real fur pillow
trimming the fabric back of the real fur pillow
Sewing together real fur pillow
Finished real fur pillow front
back of real fur pillow

Hi, I’m Jules!

My goal is to help others learn new things without getting frustrated. Join me in my DIY craft projects adventures with simple, complete instructions, and read more about me here.

Create Happy!

 Jules Signature light purple

I love to DIY, make things by hand and be creative. My goal is to help others learn new things without getting frustrated. Join me in my DIY adventures with simple, complete instructions, and read More about me here.

Create Happy!

Make the perfect Blanket.

make the perfect blanket

Make the perfect Blanket.

Learn how to create a the perfect blanket for yourself or as cozy gift. The perfect blanket is designed to allow you to make ANY SIZE blanket from king size to baby blanket.

Follow my step by step instructions below. Not sure what size is perfect for you? Check out my simple blanket size chart!

Skill level: easy

1. Size.

Chose what size blanket you want to make. The perfect blanket size chart is available in my free resource library. 

2. Fabric.

For this simple blanket I purchased 1 yard each of two coordinating fabrics and 5 yards of trim from Joanns Fabric to make a baby blanket. I first chose a 100% cotton material that is very soft and smooth. I think it is cooler for baby to lay on in warmer temperatures. The second fabric is a cotton flannel that is very warm, soft and cozy. I washed and dried the fabric. If you want the crisp finish on the fabric, spray Magic Sizing Fabric Finish

Gather your tools together, then put on some favorite music and have a snack available. Get ready to create your perfect blanket!

 

3. Trim fabric.

Smooth the larger fabric down on a flat surface. Place the smaller fabric on top, lining up one or two straight edges of the fabric. Make sure both fabrics are flat with no wrinkles. Trim edges with a rotary cutter and straight edge to the desired dimensions of the chosen blanket size. The fabrics may be trimmed separately. A fabric pen may be used to draw a line on the fabric to cut with scissors if you don’t have a rotary cutter.

 

4. Lay out the trim.

Choose which fabric to attach the trim to. I chose the flannel fabric in this blanket but either is fine. Minky fabric is slippery so if I am using this fabric, I usually don’t attach trim to it. Lay fabric flat on surface, right side up ~ the side you want showing. Pin your trim on top with the finished edge towards the middle of fabric.

Corners.

Sewing trim around corners can be done in a few ways. One way is to pin the trim, rounding the corner. This way finishes with a curved corner. If you prefer a square corner, pin the trim straight into corner. At the turn, fold the trim over, at a 90 degree angle, running the trim down each edge of fabric. Pin the finished edge of trim away from the corner and away from the blanket edges. Make sure the finished edge of trim doesn’t get sewn into edge of blanket.

This is a square corner. The finished trim edge on the left side as you look at picture, or where the 2 white pin heads are, should fold back on itself – towards the right side. Be careful as you sew the trim edge not to sew the end into edge of blanket.

 

This is a rounded corner. Notice how the trim is pinned around the corner. The wider the trim, the more rounded it will look.

 

6. Pin the trim.

Pin the trim around the entire edge of fabric then join ends together with a slight overlap to connect them.

If the trim has an opening, the end can be tucked inside the raw end to give a more finished look, as in this picture. If it is a one layer trim, such as a satin ribbon, just overlap slightly and curve off the edge, pin in place. Or hem the edge of the ribbon, overlap slightly and pin in place.

 

7. Baste stitch trim.

Baste stitch the trim to fabric with a large stitch, close to the fabric edge.

 

8. Put right sides together.

Lay fabric with the trim, right side up, smooth on a surface. Place the second fabric right side down on top. This will make a sandwich with the trim in the middle.  

 

9. Pin fabric together.

Pin fabric together with trim in the middle. The trim may give a thickness to the blanket, be sure to keep fabric edges aligned when they are pinned. The fabric was trimmed the same size, it is important to keep edges even so the finished blanket lays flat. 

 

10. Sew fabrics together.

Sew fabrics together using the trim baste stitch as the guide to stitch. Stitch with a 3.0 or 3.5 stitch length on the inside of the basted stitch line. Leave an opening from 4-6 inches wide to turn the blanket right side out.

 

11. Turn the blanket right side out.

 Reach into the opening, grab a far corner then pull the corner out of the opening. Make sure the blanket lays flat.

12. Press.

Press with an iron, turning the open area under so that the fabric follows the seam.

 

13. Pin open area closed.

Pin open area together in place. Pull the fabric taunt to turn the open area under or towards the inside of blanket. 

 

14. Top stitch.

To close open area and finish the blanket, top stitch close to edge. For even consistent stitches use the Handmade Jules handstitch guide in our free library. 

 

The finished perfect blanket!

sewing the top stitch on the blanket
Bee Blanket
materials for blanket
trim material for perfect blanket
Trim on blanket
rounded corner of blanket
corner trim on blanket
rounded corner of blanket
pin the trim on blanket
sewing trim on blanket
right side together blanket
pinned layers of blanket
sewing the blanket together
turning the blanket right side out
blanket pressing

My goal is to help others learn new things without getting frustrated. Join me in my DIY craft projects adventures with simple, complete instructions, and read more about me here.

Create Happy!

 Jules Signature light purple

I love to DIY, make things by hand and be creative. My goal is to help others learn new things without getting frustrated. Join me in my DIY adventures with simple, complete instructions, and read More about me here.

Create Happy!

Super Cute Fabric Bookmark.

Super Cute Fabric Bookmark.

This super cute and easy to make fabric bookmark is a perfect sewing project to teach a young crafter. She used real fabric scissors, a sewing machine and an iron all while she experienced the joy of giving. The bonding between the two of us along with the person she gave her gift to, was so special. She still talks about this today.

1. Choose the fabrics.  

For the fabric bookmark my granddaughter used two different coordinating fabrics but it can be used with one. 

 

2. Iron the fabric.

It is important to have the fabric smooth and wrinkle free when the shape is cut. Put the iron just hot enough to press the fabric smooth. Place your hand over the top of the child’s hand while ironing. Talk about how the hot iron will burn the skin and show how to hold the fabric safely. Show the safe way to rest the iron on the ironing board to not start a fire. Again use your best judgement if this is safe for your student.

 

3. Pick the shape.

If this is a lesson for a young child keep it simple. A rectangle works well but any shape will work. 

 

4. Cut the fabrics into the shape.

If you are teaching a youngster, use your judgement on whether they are able to use fabric scissors. If you don’t want the child to use the fabric scissors, have them make a template for you to use to cut the fabric. Draw the shape on paper and have the child cut with child safety scissors. Use their paper piece as a template when you cut the fabric. They will feel a part of the cutting process when you use their template piece. When I taught my grandbaby, I put my hands over hers on the scissors while she cut to ensure her safety. I showed her where to put her other hand safely to guide the fabric. We talked about how the scissors would cut her skin and how easily it happens ~even to grown ups. 

 

5. Place the fabrics right side together and pin.  

With the right sides facing each other, have the child line the edges of the fabric together. Explain how the end of the pin is sharp and will poke. Show how to pin the fabric together and let the child pin every inch or so. My grandbaby laid the fabric flat on the table and put the pin in then picked up the fabric to push the end of pin through. 

 

6. Stitch along the edges.

Have the child sit at the sewing machine while you lean over the top of them. Have their hands on the fabric as if to sew, then place your hands on top of theirs. Turn your speed all the way down to the slowest. The adult controls the foot pedal and the speed until the child can comfortably do it.  Leave a small area open to turn the bookmark right side out. 

 

7. Turn the bookmark right side out.

Using a pencil or chop stick turn the bookmark right side out. Push the corners out then hand flatten the fabric. Pull the fabric taunt so the fabric opening folds into the bookmark. Press with the iron. Pin in place. Again use your judgement if your student is able to do this safely. The pinning can be done prior to ironing if you are using glass headed pins. If you are using plastic headed pins, which are more common, they will melt under the iron.

 

8. Top stitch.

With the sewing machine top stitch on the right side close to outside edge. This will close the open area and finish the bookmark.  

 

 9. Trim threads.

Trim all the loose threads from bookmark.

 

Hi, I’m Jules!

My goal is to help others learn new things without getting frustrated. Join me in my DIY craft projects adventures with simple, complete instructions, and read more about me here.

Create Happy!

 Jules Signature light purple

I love to DIY, make things by hand and be creative. My goal is to help others learn new things without getting frustrated. Join me in my DIY adventures with simple, complete instructions, and read More about me here.

Create Happy!

llama Baby Blanket.

Llama Baby Blanket Header

llama Baby Blanket.

Learn how to make a cute and easy llama baby blanket! Below are all methods, materials and instructions with pictures, used in creating a fab baby gift!

One of my “besties” (best friend) is becoming a Grandma to a baby girl soon! Bestie lives 8 hours away so… A grandma gift through the mail is in order to celebrate! A llama baby gift. “Bestie” is an interior designer whose house is beautifully decorated in a color palette of grays, white and black.

Skill level: easy

I remember reading to my children our favorite books, cuddling in a blanket. To make a memorable gift for my new grandma bestie, I will make a handmade baby blanket that coordinates with her home’s decor. Adding a unique touch to the gift,  I will include a book themed with the blanket. A themed homemade gift to celebrate new Grandma!

To complete my gift, I visited Amazon and purchased Llama Llama Gram and Grandpa by Anna Dewdney, a book others have told me is popular now and “Is Your Momma A Llama?” by Deborah Guarino, one my children loved.   Now the gift has two favorite books!

For step by step instructions, click to go to the Perfect Blanket Instructions. The pictures below show the materials I used for the  perfect baby blanket.

llama blanket
Jules Signature light purple

Hi, I’m Jules!

I love to DIY, make things by hand and be creative. My goal is to help others learn new things without getting frustrated. Join me in my DIY adventures with simple, complete instructions, and read More about me here.

Create Happy!

Hi, I’m Jules!

My goal is to help others learn new things without getting frustrated. Join me in my DIY craft projects adventures with simple, complete instructions, and read more about me here.

Create Happy!

 Jules Signature light purple